Marbleflex
Marble-Look Seamless Flooring
Marbleflex is a hand-worked, bio-based resin floor that reproduces the movement and depth of natural stone without joints, grout lines, or quarried slabs. Every floor is troweled in place, so no two are identical.
The warmth and depth of natural marble, poured seamlessly wall to wall.
Marbleflex is a tough-elastic, seamless flooring built on renewable raw materials. Installers layer and blend pigments by hand to create soft marbled movement across the entire surface, then seal it with a high-build clear coat. The result is comfortable underfoot, quiet, warm, and completely joint free — ideal for showrooms, boutiques, lobbies, museums, and high-end residential interiors where a stone look is wanted without stone weight or maintenance.
Characteristics
- Seamless and liquid tight — no grout joints to fail
- Tough-elastic, so it resists impact and cracking
- Warm and quiet underfoot compared to real stone
- Every pour is a one-off marbled design
- Repairable and recoatable in place
Where It Works
- Retail showrooms and boutiques
- Hotel lobbies and hospitality spaces
- Corporate offices and reception areas
- Museums and galleries
- High-end residential living areas
Marbleflex color range
18 standard options. Colors on screen are a guide — ask us for physical samples before you specify.
Climate positive flooring
The Atelier Collection is built on natural and renewable raw materials rather than fossil-based systems, which meaningfully lowers the carbon footprint of every square foot we install.
- Built on plant-based and renewable raw materials instead of fossil-based resins.
- Low embodied carbon: under 5 kg CO2 per square meter, meeting 2030 emission targets.
- Installed seamlessly and liquid-applied, so there is no cutting waste on site.
- Red List free formulation with no plasticizers and very low emissions after cure.
- Long service life and refinishable surface reduce replacement cycles.
Marbleflex at a glance
| System type | Hand-troweled bio-based resin, seamless |
|---|---|
| Typical thickness | 2 – 3 mm |
| Finish | Matte, satin, or gloss clear coat |
| Substrate | Concrete, screed, or leveled wood with primer |
| Walkable | 24 hours after install |
| Full cure | 7 days at 15°C minimum |
| Slip resistance | R9 – R10 depending on top coat |
| Warranty | Commercial-grade, project specific |
Marbleflex in place
Marbleflex
Marble-look pour running seamlessly wall to wall, hand-troweled for natural movement.
Keeping it looking new
Request Marbleflex Samples
Tell us about your space and we'll send physical samples and a written recommendation.