Stonecast
Stonecast Aggregate Flooring
Stonecast blends natural sands and mineral aggregates into a bio-based binder for a floor that reads as honest stone — matte, tactile, and quietly textured.
Natural mineral aggregates bound seamlessly and ground to a stone-true finish.
Stonecast is a seamless aggregate floor built from graded natural minerals. Once cured, it is ground and sealed to a soft matte finish that keeps the tactile grain of the stone while remaining easy to clean. The twelve standard blends run from pale limestone tones to dark volcanic greys, and custom blends can be matched to a project palette.
Characteristics
- Authentic natural stone appearance and texture
- Seamless with no tile joints
- Hard-wearing ground surface
- Matte finish hides traffic patterns
- Custom aggregate blends available
Where It Works
- Retail and gallery floors
- Hospitality and restaurants
- Lobbies and circulation
- Kitchens and bathrooms
- Indoor-outdoor transitions
Stonecast aggregate blends
12 standard options. Colors on screen are a guide — ask us for physical samples before you specify.
Climate positive flooring
The Atelier Collection is built on natural and renewable raw materials rather than fossil-based systems, which meaningfully lowers the carbon footprint of every square foot we install.
- Built on plant-based and renewable raw materials instead of fossil-based resins.
- Low embodied carbon: under 5 kg CO2 per square meter, meeting 2030 emission targets.
- Installed seamlessly and liquid-applied, so there is no cutting waste on site.
- Red List free formulation with no plasticizers and very low emissions after cure.
- Long service life and refinishable surface reduce replacement cycles.
Stonecast at a glance
| System type | Mineral aggregate in bio-based binder |
|---|---|
| Typical thickness | 4 – 8 mm |
| Finish | Ground matte, sealed |
| Standard blends | 12 natural aggregate colorways |
| Substrate | Concrete or screed with primer |
| Walkable | 24 hours after install |
| Full cure | 7 days at 15°C minimum |
| Slip resistance | R10 – R11 |
Stonecast in place
Stonecast
Natural stone texture cast in place, warm and lightly speckled.
Keeping it looking new
Request Stonecast Samples
Tell us about your space and we'll send physical samples and a written recommendation.